1.69″ SPI LCD Arduino | 240×280 SPI Interface | STM32/C51/MSP430 Demo Codes

SKU: DS20206

Tamaño:	1.69 inch
Resolución:	240*280
Interfaz:	SPI
Compatible con pantallas táctiles:	NO
Board Support	Raspberry Pi

High-performance 1.69″ IPS TFT module with 240×280 resolution, 65K RGB colors & 4-wire SPI interface. Supports STM32/C51/MSP430 with ready-to-use demo codes. -10℃~60℃ operating range.

$99.00

Descripción

1.69″ SPI LCD Arduino | 240×280 SPI Interface:

1.69 inch IPS TFT Display Module engineered for embedded systems. Featuring a crisp 240×280 resolution with 65K RGB color reproduction, this display delivers 170° wide viewing angles through advanced IPS technology.

✅ Ultra-compact 4-wire SPI interface minimizes GPIO usage
✅ Plug-and-play compatibility with STM32/C51/MSP430 platforms
✅ Robust performance across -10℃ to 60℃ environments
✅ Anti-glare surface treatment for outdoor readability
✅ <15ms response time for dynamic content display

1.69 inch IPS SPI Module
Key Parameters	Display Color	RGB 65K color	Interfaz	PIN NO.	SYMBOL	DESCRIPTION
	Tamaño de la pantalla	1.69(inch)		1	GND	LCD Power ground
	Type	IPS		2	VCC	LCD power supply is positive (3.3V)
	Driver IC	ST7789		3	SCL	LCD SPI bus clock signal
	Resolución	240*280 (Pixel)		4	SDA	LCD SPI bus write data signal
	Module Interface	4-line SPI interface		5	RES	LCD reset control signal(Low level reset)
	Active Area (AA area)	27.972×32.634 (mm)		6	DC	LCD register / data selection control signal
	Module PCB Size	31.00×48.00(mm)		6	DC	(Low level: register, high level: data)
	Temperatura de funcionamiento	-10℃~60℃		7	CS	LCD chip select control signal (low level enable)
	Temperatura de almacenamiento	-20℃~70℃		8	BLK	LCD backlight control signal (high level lighting,
	VCC power voltage	3.3V		8	BLK	if you do not need control, please connect 3.3V)
product picture