JZ-VDH68 V1.1 LCD Driver Board for Resolution MAX to 1920x1200 LVDS&EDP Display

COD: DS40045
Numero di modello

JZ-VDH68 V1.1

Maximum supported resolution

1920x1200

Model Source

1 VGA/1 DVI/HDMI

Output Interface

LVDS/EDP

Resources:

JZ-VDH68 V1.1 LCD Driver Board Support 1920x1200 TFT LCD screen, with 1 VGA, 1 DVI and 1 HDMI interfaces, and supports LVDS output interface and eDP output interface

Richiesta di prezzi a volume







    Descrizione

    JZ-VDH68 V1.1 TFT LCD Driver Board :

     

    ✅ Operating temperature range -20 to 65℃.
    ✅ Optional automatic light control.
    ✅ Supports maximum resolution up to 1920x1200.
    ✅ Can receive remote control function.
    ✅ Basic resolution supports up to 85Hz (if the LCD screen used can work at 85Hz).

    ✅The maximum power amplifier supports 2X10W

    ✅Supports serial port protocol control.

    JZ-VDH68 V1.1

     

    Main Features
    Display Output Maximum Resolution Max. 1920x1200
    Output Interface Single/Dual LVDS
    Supported Signals Analog RGB Horizontal Freq: 30-120KHz Vertical Freq: 50-75Hz 0.7Vp-p@75ohm Separate/Composite/SOG sync support
    Digital DVI/HDMI Horizontal Freq: 30-120KHz Vertical Freq: 50-75Hz 0.7Vp-p@75ohm Separate/Composite/SOG sync support
    Buttons Power, Menu, Exit, Plus, Minus
    Menu Type Graphical OSD
    Language Support Chinese, English, and 8 other languages
    Function Operations Picture Mode/Brightness/Contrast/Saturation/Sharpness/Hue
    Function Language/Reset/Color Temp.
    PC Clock/Phase/H position/V position/Auto configure
    Power supply Stand-by <0.5W 12Vstb/200mA
    Input 12V/dc
    Interface Definition
    LVDS/eDP DuPont output
    Pin No. Function Pin No. Function Pin No. Function
    1 VCC 11 RXO2-/LANE1_N 21 RXE1-
    2 VCC 12 RXO2+/LANE1_P 22 RXE1+
    3 VCC 13 GND 23 RXE2-
    4 AUX_CH_P 14 GND 24 RXE2+
    5 AUX_CH_N 15 RXOC- 25 GND
    6 GND 16 RXOC+ 26 GND
    7 RXO0- 17 RXO3- 27 RXEC-
    8 RXO0+/eDP_HPD 18 RXO3+ 28 RXEC+
    9 RXO1-/LANE0_N 19 RXE0- 29 RXE3-
    10 RXO1+/LANE0_P 20 RXE0+ 30 RXE3+
    eDP FPC output (30-pin)
    Pin No. Function Pin No. Function Pin No. Function
    1 NC 11 GND 21 GND
    2 GND 12 VLCD 22 EN
    3 LANE1_N 13 VLCD 23 ADJ
    4 LANE1_P 14 NC 24 NC
    5 GND 15 GND 25 NC
    6 LANE0_N 16 GND 26 +12V
    7 LANE0_P 17 eDP_HPD 27 +12V
    8 GND 18 GND 28 +12V
    9 AUX_CH_P 19 GND 29 +12V
    10 AUX_CH_N 20 GND 30 NC
    Backlight Board Port
    Pin No. Function Pin No. Function Pin No. Function
    1 12V 3 EN 5 GND
    2 12V 4 ADJ 6 GND

    LVDS LCD Controller Board FAQ

    Can this controller board drive my existing LCD panel?

    Listed source inputs include HDMI, VGA, and DVI. Listed panel outputs include LVDS. Check both ends independently against the source and LCD documentation. Send the complete LCD part number and connector photos. Check the panel supply and pinout, backlight power and enable or dimming signals before applying power.

    TFT LCD datasheet integration guide

    Will this board support the resolution and refresh rate my source needs?

    Treat 1920 × 1200 as the listed maximum supported resolution. Check that the board firmware actually offers your panel’s exact timing and refresh. Check whether the source mode is accepted and whether the LCD will be driven at its native mode. Include the exact source and target mode in your request.

    Should I use this board or order a controller already configured for my LCD?

    Use JZ-VDH68 V1.1 as the listed controller reference, then compare the full part number and revision on the label. Compare firmware availability, cable and backlight changes, mounting space and time to validate your panel. A matched board and cable can be easier to reproduce when the same LCD revision will be used in production.

    Can the board be configured with a matched cable or panel firmware?

    Send the complete panel label and datasheet, source input, panel connector and backlight details. We can review an available board and cable combination and confirm what firmware configuration is required.

    What determines pricing and lead time for an LCD controller and cable set?

    Include the full LCD model, input/output timing, cable requirement, sample quantity and required date. Ask for the hardware, accessories and any one-time setup itemized, with sample cost, production quantity breaks and separate delivery dates.

    Informazioni aggiuntive

    Numero di modello

    JZ-VDH68 V1.1

    Maximum supported resolution

    1920x1200

    Model Source

    1 VGA/1 DVI/HDMI

    Output Interface

    LVDS/EDP

    Soluzioni espositive personalizzate

    Collaborate con i nostri esperti di progettazione per creare il display perfetto per la vostra applicazione. 

    Copyright © 2025 Displaysell.com. Tutti i diritti riservati.

    Mappa del sito

    Informativa sulla privacy

    Termini e condizioni