FPD-QHD TFT Driver Board for Resolution MAX to 2560x2048 pixels LVDS LCD Display

Artikelnummer: DS40042
Modellnummer

FPD-QHD

Maximum supported resolution

2560x2048

Model Source

VGA / DVI /HDMI /DP

Output Interface

LVDS

Resources:

TFT Driver Board Support 2K TFT LCD screen, driver board with 1 VGA, 1 DVI, 1 HDMI, 1 Displayport input interface, supports 4-channel LVDS output interface

Preisanfrage für Volumen







    Beschreibung

    FPD-QHD TFT Driver Board:

     

    ✅ Optional automatic light sensor control
    ✅ Support Flip/Rotate display
    ✅ Support Frame Convert
    ✅ Support Gray Display
    ✅ Maximum resolution up to 2560x1600, 2560x1440, 2560x1080, 2560x2048

    ✅Built-in 2x8W audio amplifier

    ✅Supports HDMI 1.3, compatible with DisplayPort V1.2

    HDMI TO LVDS driver board

     

    Main Features
    Display Output Maximum Resolution Max. 2560x1600
    Output Interface Single/Dual LVDS
    Supported Signals Analog RGB Horizontal Freq: 30-120KHz Vertical Freq: 50-75Hz 0.7Vp-p@75ohm Separate/Composite/SOG sync support
    Digital DVI Horizontal Freq: 30-120KHz Vertical Freq: 50-75Hz 0.7Vp-p@75ohm Separate/Composite/SOG sync support
    DisplayPort Input Supports 2.7Gbps and 1.62Gbps per lane 10.8Gbps bandwidth over 4 lanes
    Buttons Power, Menu, Exit, Plus, Minus
    Menu Type Graphical OSD
    Language Support Chinese, English, and 6 other languages
    Function Operations Picture Mode/Brightness/Contrast/Saturation/Sharpness/Hue
    Function Language/Reset/Color Temp.
    PC Clock/Phase/H position/V position/Auto configure
    Input <1W 12Vstb/200mA
    Interface Definition
    LVDS Output (40-pin)
    Pin No. Function Pin No. Function Pin No. Function Pin No. Function
    1 Reserve 11 MRX00- 21 MRX03+ 31 MRXEC+
    2 HDP 12 MRX00+ 22 MRXE0- 32 MRXE3-
    3 NC 13 MRX01- 23 MRXE0+ 33 MRXE3+
    4 GND 14 MRX01+ 24 GND 34 GND
    5 GND 15 MRX02- 25 MRXE1- 35 NC
    6 GND 16 MRX02+ 26 MRXE1+ 36 NC
    7 MRX04- 17 GND 27 GND 37 NC
    8 MRX04+ 18 MRX0C- 28 MRXE2- 38 VCC
    9 MRXE4- 19 MRX0C+ 29 MRXE2+ 39 VCC
    10 MRXE4+ 20 MRX03- 30 MRXEC- 40 VCC
    LVDS Output (30-pin)
    Pin No. Function Pin No. Function Pin No. Function
    1 SRXO0- 11 SRXO3- 21 SRXE2-
    2 SRXO0+ 12 SRXO3+ 22 SRXE2+
    3 SRXO1- 13 SRXO4- 23 NC
    4 SRXO1+ 14 SRXO4+ 24 NC
    5 SRXO2- 15 GND 25 SRXEC-
    6 SRXO2+ 16 GND 26 SRXEC+
    7 GND 17 SRXE0- 27 SRXE3-
    8 GND 18 SRXE0+ 28 SRXE3+
    9 SRXOC- 19 SRXE1- 29 SRXE4-
    10 SRXOC+ 20 SRXE1+ 30 SRXE4+
    Backlight Board Port
    Pin No. Function Pin No. Function Pin No. Function
    1 12V 3 INV-ON 5 GND
    2 12V 4 BRIGHT 6 GND
    Panel Voltage Selection Port
    Pin No. Function Pin No. Function
    1 3.3 V 3 5V
    2 GND

    LVDS LCD Controller Board FAQ

    Can this controller board drive my existing LCD panel?

    Listed source inputs include HDMI, VGA, DVI, and DisplayPort. Listed panel outputs include LVDS. Check both ends independently against the source and LCD documentation. Send the complete LCD part number and connector photos. Check the panel supply and pinout, backlight power and enable or dimming signals before applying power.

    TFT LCD datasheet integration guide

    Will this board support the resolution and refresh rate my source needs?

    Treat 2560 × 2048 as the listed maximum supported resolution. Check that the board firmware actually offers your panel’s exact timing and refresh. Check whether the source mode is accepted and whether the LCD will be driven at its native mode. Include the exact source and target mode in your request.

    Should I use this board or order a controller already configured for my LCD?

    Use the full controller part number and revision from the unit label and the corresponding drawing. Compare firmware availability, cable and backlight changes, mounting space and time to validate your panel. A matched board and cable can be easier to reproduce when the same LCD revision will be used in production.

    Can the board be configured with a matched cable or panel firmware?

    Send the complete panel label and datasheet, source input, panel connector and backlight details. We can review an available board and cable combination and confirm what firmware configuration is required.

    What determines pricing and lead time for an LCD controller and cable set?

    Include the full LCD model, input/output timing, cable requirement, sample quantity and required date. Ask for the hardware, accessories and any one-time setup itemized, with sample cost, production quantity breaks and separate delivery dates.

    Zusätzliche Informationen

    Modellnummer

    FPD-QHD

    Maximum supported resolution

    2560x2048

    Model Source

    VGA / DVI /HDMI /DP

    Output Interface

    LVDS

    Individuelle Display-Lösungen

    Arbeiten Sie mit unseren technischen Experten zusammen, um das perfekte Display für Ihre Anwendung zu entwickeln. 

    Urheberrecht © 2025 Displaysell.com. Alle Rechte vorbehalten.

    Lageplan

    Datenschutzbestimmungen

    Bedingungen Bedingungen