Descrizione
JZ-VH68U V1.0 TFT Driver Board:
|
✅ Operating temperature range: -20 to 60°C. ✅The maximum power amplifier supports 2X10W. ✅Supports serial port protocol control. |
 |
| Main Features | |||||
| Display Output | Maximum Resolution | Max. 1920×1200 | |||
| Output Interface | Single/Dual LVDS | ||||
| Supported Signals | Analog RGB | Horizontal Freq: 30-120KHz Vertical Freq: 50-75Hz 0.7Vp-p@75ohm Separate/Composite/SOG sync support | |||
| Digital DVI/HDMI | Horizontal Freq: 30-120KHz Vertical Freq: 50-75Hz 0.7Vp-p@75ohm Separate/Composite/SOG sync support | ||||
| Buttons | Power, Menu, Exit, Plus, Minus | ||||
| Menu Type | Graphical OSD | ||||
| Language Support | Chinese, English, and 8 other languages | ||||
| Function Operations | Picture | Mode/Brightness/Contrast/Saturation/Sharpness/Hue | |||
| Function | Language/Reset/Color Temp. | ||||
| PC | Clock/Phase/H position/V position/Auto configure | ||||
| Power supply | Stand-by | <0.5W 12Vstb/200mA | |||
| Input | 12V/dc | ||||
| Interface Definition | |||||
| LVDS output | |||||
| Pin No. | Function | Pin No. | Function | Pin No. | Function |
| 1 | VCC | 11 | RXO2- | 21 | RXE1- |
| 2 | VCC | 12 | RXO2+ | 22 | RXE1+ |
| 3 | VCC | 13 | GND | 23 | RXE2- |
| 4 | GND | 14 | GND | 24 | RXE2+ |
| 5 | GND | 15 | RXOC- | 25 | GND |
| 6 | GND | 16 | RXOC+ | 26 | GND |
| 7 | RXO0- | 17 | RXO3- | 27 | RXEC- |
| 8 | RXO0+ | 18 | RXO3+ | 28 | RXEC+ |
| 9 | RXO1- | 19 | RXE0- | 29 | RXE3- |
| 10 | RXO1+ | 20 | RXE0+ | 30 | RXE3+ |
| Backlight Board Port | |||||
| Pin No. | Function | Pin No. | Function | Pin No. | Function |
| 1 | 12V | 3 | ON/OFF | 5 | GND |
| 2 | 12V | 4 | ADJ | 6 | GND |
| 3.3v/5v Panel Voltage Selection Port | |||||
| Pin No. | Function | Pin No. | Function | ||
| 1 | 5V | 3 | 3.3V | ||
| 2 | VPANEL_IN | ||||
| 12v Panel Voltage Selection Port | |||||
| Pin No. | Function | Pin No. | Function | ||
| 1 | 12V | 2 | VPANEL_IN | ||
