1.8" TFT LCD Module 128x160 | Arduino/STM32 Support | Industrial-Grade Reliability

Artikelnummer: DS20208
Größe:

Auflösung:

Schnittstelle:

Touchscreen-Unterstützung:

Board Support

Raspberry Pi

abc

High-performance 1.8" SPI LCD module with 128x160 resolution, SD card slot, Arduino/C51/STM32 code examples. Industrial-grade stability for DIY & embedded projects.

Preisanfrage für Volumen







    Beschreibung

    1.8" TFT LCD Module 128x160 | Arduino/STM32 Support:

    1.8-inch SPI LCD Module – a compact, high-resolution (128x160) display designed for seamless integration with Arduino, C51, STM32, and other embedded platforms.

    ✅ 128x160 RGB resolution with 18-bit color depth
    ✅ SPI interface (3-wire/4-wire modes) + built-in SD card slot
    ✅ Wide compatibility: Arduino Uno/Mega, STM32F1/F4, 8051 MCUs
    ✅ Ultra-low latency (<5ms response time)
    ✅ RoHS-certified, CE/FCC pre-tested

    TFT LCD Module

     

    1.8inch SPI Module ST7735S
    Key Parameters Display Color RGB 65K color Schnittstelle PIN NO. SYMBOL DESCRIPTION
    Screen Size 1.8(inch) 1 RST LCD reset signal, low level reset
    Type TFT 2 CS LCD chip select signal, low level enable
    Driver IC ST7735S 3 D/C LCD register / data selection signal,
    Auflösung 128*160 (Pixel) high level: register, low level: data
    Module Interface 4-wire SPI interface 4 DIN LCD SPI bus write data signal
    Active Area (AA area) 28.03x35.04(mm) 5 CLK LCD SPI bus clock signal
    Module PCB Size 34.5x58.0(mm) 6 VCC LCD Power positive (3.3V~5V)
    Betriebstemperatur -20℃~60℃ 7 BL Backlight control, high level lighting,
    Lagertemperatur -30℃~70℃ if not controlled, connect 3.3V always bright
    VCC power voltage 3.3V 8 GND LCD Power ground
    product picture STM32 Screen

    Download

    1.8-Inch 128 × 160 SPI TFT LCD Display Module FAQ

    Can my microcontroller show this interface without clipping or running out of memory?

    Try your smallest text, longest labels and icons on a 128 × 160 canvas before committing to the enclosure. Calculate framebuffer memory for your selected pixel format and buffering strategy, then measure the update time with the intended microcontroller.

    How can I check whether my existing display library will work?

    For the listed SPI interface, check the exact controller, SPI mode, logic levels and update time with a representative screen. Check that the library names the exact display controller and supports its initialization, addressing and orientation. Test a full-screen pattern before porting the UI.

    LCD display interface guide

    Should I choose this display bus or another interface on my controller?

    Compare pin availability, logic levels, code support and measured full-screen update time with your existing host. For the listed LCD, compare viewing-angle shifts and dark-screen appearance through the front cover. Include the space needed for the connector and any adapter.

    Can the connector, flex, or display assembly be adapted to my controller board?

    Send the host schematic or board model, connector, flex length and use case. We can review connector and mounting options and identify the bus mode, logic levels and controller initialization to lock down before sampling.

    What determines the cost and timing of a sample for my MCU project?

    Include the host, preferred controller or bus, cable requirements, sample quantity and target date. We can quote the proposed changes, any one-time tooling or engineering, sample price and production MOQ separately. Ask for distinct sample and production lead times on the quoted drawing revision.

    Zusätzliche Informationen

    Größe:

    Auflösung:

    Schnittstelle:

    Touchscreen-Unterstützung:

    Board Support

    Raspberry Pi

    Individuelle Display-Lösungen

    Arbeiten Sie mit unseren technischen Experten zusammen, um das perfekte Display für Ihre Anwendung zu entwickeln. 

    Urheberrecht © 2025 Displaysell.com. Alle Rechte vorbehalten.

    Lageplan

    Datenschutzbestimmungen

    Bedingungen Bedingungen