1.44" LCD Arduino Module with SPI Interface & SD Slot - 128x128, 65K Color

Artikelnummer: DS20204
Größe:

Auflösung:

Schnittstelle:

Touchscreen-Unterstützung:

Board Support

Raspberry Pi

abc

1.44-inch IPS TFT module with 16-bit RGB, 128x128 resolution, 4-wire SPI interface & SD card slot. Ideal for embedded systems. Operates at -20°C~60°C.

Preisanfrage für Volumen







    Beschreibung

    1.44" LCD Arduino Module with SPI Interface & SD Slot:

    ✅ 1.44" IPS panel with 65K true-color depth
    ✅ Ultra-low latency SPI control
    ✅ Built-in SD card slot enables seamless data storage expansion, supporting firmware updates, image libraries, or log recording.
    ✅ Wide temperature range & anti-glare coating
    ✅ Compact PCB size: 31.49mm x 43.95mm
    LCD Arduino Module

     

    1.44 inch Arduino SPI Module
    Key Parameters Display Color 16BIT RGB 65K color Schnittstelle PIN NO. SYMBOL DESCRIPTION
    Screen Size 1.44(inch) 1 VCC LCD Power positive (3.3V~5V)
    Type TFT 2 GND LCD Power ground
    Driver IC ST7735S 3 GND LCD Power ground
    Auflösung 128*128 (Pixel) 4 NC Not defined, reserved
    Module Interface 4-wire SPI interface 5 NC Not defined, reserved
    Active Area (AA area) 26.2x27.2 (mm) 6 LED Backlight control, high level lighting,
    if not controlled, connect 3.3V always bright
    Module PCB Size 31.49x43.95 (mm) 7 CLK LCD SPI bus clock signal
    Betriebstemperatur -20℃~60℃ 8 SDI LCD SPI bus write data signal
    Lagertemperatur -30℃~70℃ 9 RS LCD register / data selection signal,
    high level: register, low level: data
    VCC power voltage 5V/3.3V 10 RST LCD reset signal, low level reset
    11 CS LCD chip select signal, low level enable

    Download

    1.44-Inch 128 × 128 SPI LCD Display Module FAQ

    Can my microcontroller show this interface without clipping or running out of memory?

    Try your smallest text, longest labels and icons on a 128 × 128 canvas before committing to the enclosure. Calculate framebuffer memory for your selected pixel format and buffering strategy, then measure the update time with the intended microcontroller.

    How can I check whether my existing display library will work?

    For the listed SPI interface, check the exact controller, SPI mode, logic levels and update time with a representative screen. Check that the library names the exact display controller and supports its initialization, addressing and orientation. Test a full-screen pattern before porting the UI.

    LCD display interface guide

    Should I choose this display bus or another interface on my controller?

    Compare pin availability, logic levels, code support and measured full-screen update time with your existing host. For the listed LCD, compare viewing-angle shifts and dark-screen appearance through the front cover. Include the space needed for the connector and any adapter.

    Can the connector, flex, or display assembly be adapted to my controller board?

    Send the host schematic or board model, connector, flex length and use case. We can review connector and mounting options and identify the bus mode, logic levels and controller initialization to lock down before sampling.

    What determines the cost and timing of a sample for my MCU project?

    Include the host, preferred controller or bus, cable requirements, sample quantity and target date. We can quote the proposed changes, any one-time tooling or engineering, sample price and production MOQ separately. Ask for distinct sample and production lead times on the quoted drawing revision.

    Zusätzliche Informationen

    Größe:

    Auflösung:

    Schnittstelle:

    Touchscreen-Unterstützung:

    Board Support

    Raspberry Pi

    Individuelle Display-Lösungen

    Arbeiten Sie mit unseren technischen Experten zusammen, um das perfekte Display für Ihre Anwendung zu entwickeln. 

    Urheberrecht © 2025 Displaysell.com. Alle Rechte vorbehalten.

    Lageplan

    Datenschutzbestimmungen

    Bedingungen Bedingungen