Description
1.8" TFT LCD Module 128x160 | Arduino/STM32 Support:
| 1.8-inch SPI LCD Module – a compact, high-resolution (128x160) display designed for seamless integration with Arduino, C51, STM32, and other embedded platforms.
✅ 128x160 RGB resolution with 18-bit color depth |
 |
| 1.8inch SPI Module ST7735S | ||||||
| Key Parameters | Display Color | RGB 65K color | Interface | PIN NO. | SYMBOL | DESCRIPTION |
| Screen Size | 1.8(inch) | 1 | RST | LCD reset signal, low level reset | ||
| Type | TFT | 2 | CS | LCD chip select signal, low level enable | ||
| Driver IC | ST7735S | 3 | D/C | LCD register / data selection signal, | ||
| Resolution | 128*160 (Pixel) | high level: register, low level: data | ||||
| Module Interface | 4-wire SPI interface | 4 | DIN | LCD SPI bus write data signal | ||
| Active Area (AA area) | 28.03x35.04(mm) | 5 | CLK | LCD SPI bus clock signal | ||
| Module PCB Size | 34.5x58.0(mm) | 6 | VCC | LCD Power positive (3.3V~5V) | ||
| Operating Temperature | -20℃~60℃ | 7 | BL | Backlight control, high level lighting, | ||
| Storage Temperature | -30℃~70℃ | if not controlled, connect 3.3V always bright | ||||
| VCC power voltage | 3.3V | 8 | GND | LCD Power ground | ||
| product picture |  |
|||||
