14 Inch TFT LCD Display eDP 1.2 1920×1080 Screen Panel

Use the 14-inch diagonal to shortlist display modules, then check the exact drawing for fit. Overlay the visible area, module outline and flex exit on your enclosure drawing. Get the native pixel layout first, then try your menus and text at that layout before committing to the enclosure.

For the listed eDP interface, match lane count, link rate, power sequencing and connector pinout. Before connecting it, check the power rails and reset sequence in the module documentation.

For the listed LCD, compare viewing-angle shifts and dark-screen appearance through the front cover. Judge readability on the assembled product with its final cover and ambient lighting. Compare the cost and space of any changes to the cable, host board or front cover.

Start with repeated power cycles, then test the intended UI through the finished cover. Use the listed 0 °C to +50 °C operating range to plan cold starts and hot running tests, with temperature measured at the panel. If touch is required, confirm the controller, host driver and cover stack for the exact configuration and test edge taps on the sample.

Use the full display part number and revision from the unit label and the corresponding drawing. Include the drawing revision, flex or connector version and any touch or cover option in the quote. Give us the sample quantity, production quantity and required date so we can confirm the configuration and lead time.