2.4 TFT Display Sheild Support Arduino UNO Mega2560

Artikelnummer: DS20192

Größe:	2.4 inch
Auflösung:	320*240
Schnittstelle:	HDMI
Touchscreen-Unterstützung:	kapazitiv
Board Support	Arduino, UNO, Mega 2560

2.4 tft display sheild, LCD touch shield, with 320*240 high resolution, Supports direct plug-in of development boards such as Arduino UNO and Mega2560, no wiring required

$99.00

Beschreibung

2.4 tft display sheild Arduino main features:

Supports direct plug-in use of development boards such as ArduinoUNO and Mega2560, no wiring required
320X240 HD resolution, supports touch function
Uses 8-bit parallel bus, which is faster than serial port SPI refresh
With SD card slot for convenient expansion of experiments
Provides Arduino library and rich sample programs
Military-grade process standards, long-term stable operation
Provides underlying driver technology support

Product Parameters	Parameter	Specification	Interface Definition	Pin No	Symbol	Description
	Display colors	RGB 65K colorful		1	LCD_RST	LCD bus reset signal
	SKU	Mar-06		2	LCD_CS	LCD bus chip select signal
	Größe	2.4(inch)		3	LCD_RS	LCD bus command/data select signal
	Display type	TFT		4	LCD_WR	LCD bus write signal
	Drive IC	ILI9341		5	LCD_RD	LCD bus read signal
	Auflösung	320*240 (Pixel)		6	GND	Power ground
	Module interface	8-bit parallel interface		7	5V	5V power input
	AA	48.96*36.72(mm)		8	3V3	NC pin can be left unconnected
	PCB Dimensions	72.20*52.7(mm)		9	LCD_D0	LCD 8-bit data Bit0
	Betriebstemperatur	-20℃~60℃		10	LCD_D1	LCD 8-bit data Bit1
	Lagertemperatur	-30℃~70℃		11	LCD_D2	LCD 8-bit data Bit2
	Voltage	5V/3.3V		12	LCD_D3	LCD 8-bit data Bit3
	Power consumption	–		13	LCD_D4	LCD 8-bit data Bit4
	Gross weight	39(g)		14	LCD_D5	LCD 8-bit data Bit5
				15	LCD_D6	LCD 8-bit data Bit6
				16	LCD_D7	LCD 8-bit data Bit7
				17	SD_SS	SD card SPI bus chip select signal
				18	SD_DI	SD card SPI bus MOSI signal
				19	SD_DO	SD card SPI bus MISO signal
				20	SD_SCK	SD card SPI bus clock signal
Product Picture