Description
JZ-VH68U V1.0 TFT Driver Board:
✅ Operating temperature range: -20 to 60°C. ✅The maximum power amplifier supports 2X10W. ✅Supports serial port protocol control. |
![]() |
Main Features | |||||
Display Output | Maximum Resolution | Max. 1920×1200 | |||
Output Interface | Single/Dual LVDS | ||||
Supported Signals | Analog RGB | Horizontal Freq: 30-120KHz Vertical Freq: 50-75Hz 0.7Vp-p@75ohm Separate/Composite/SOG sync support | |||
Digital DVI/HDMI | Horizontal Freq: 30-120KHz Vertical Freq: 50-75Hz 0.7Vp-p@75ohm Separate/Composite/SOG sync support | ||||
Buttons | Power, Menu, Exit, Plus, Minus | ||||
Menu Type | Graphical OSD | ||||
Language Support | Chinese, English, and 8 other languages | ||||
Function Operations | Picture | Mode/Brightness/Contrast/Saturation/Sharpness/Hue | |||
Function | Language/Reset/Color Temp. | ||||
PC | Clock/Phase/H position/V position/Auto configure | ||||
Power supply | Stand-by | <0.5W 12Vstb/200mA | |||
Input | 12V/dc | ||||
Interface Definition | |||||
LVDS output | |||||
Pin No. | Function | Pin No. | Function | Pin No. | Function |
1 | VCC | 11 | RXO2- | 21 | RXE1- |
2 | VCC | 12 | RXO2+ | 22 | RXE1+ |
3 | VCC | 13 | GND | 23 | RXE2- |
4 | GND | 14 | GND | 24 | RXE2+ |
5 | GND | 15 | RXOC- | 25 | GND |
6 | GND | 16 | RXOC+ | 26 | GND |
7 | RXO0- | 17 | RXO3- | 27 | RXEC- |
8 | RXO0+ | 18 | RXO3+ | 28 | RXEC+ |
9 | RXO1- | 19 | RXE0- | 29 | RXE3- |
10 | RXO1+ | 20 | RXE0+ | 30 | RXE3+ |
Backlight Board Port | |||||
Pin No. | Function | Pin No. | Function | Pin No. | Function |
1 | 12V | 3 | ON/OFF | 5 | GND |
2 | 12V | 4 | ADJ | 6 | GND |
3.3v/5v Panel Voltage Selection Port | |||||
Pin No. | Function | Pin No. | Function | ||
1 | 5V | 3 | 3.3V | ||
2 | VPANEL_IN | ||||
12v Panel Voltage Selection Port | |||||
Pin No. | Function | Pin No. | Function | ||
1 | 12V | 2 | VPANEL_IN |