14" AMOLED 1920x1200 Display | EDP Interface | 400nits | Touch Screen

Use the 14-inch diagonal to shortlist display modules, then check the exact drawing for fit. Overlay the visible area, module outline and flex exit on your enclosure drawing. Get the native pixel layout first, then try your menus and text at that layout before committing to the enclosure.

For the listed eDP interface, match lane count, link rate, power sequencing and connector pinout. Before connecting it, check the power rails and reset sequence in the module documentation.

For the listed AMOLED, compare dark-scene legibility and how your static icons look in an extended run at the intended brightness. Use the listed 400 cd/m² to shortlist the display, then judge the assembled product with its final cover and ambient lighting. Compare the cost and space of any changes to the cable, host board or front cover.

Start with repeated power cycles, then test the intended UI through the finished cover. Confirm the operating range for the exact unit and measure temperature at the panel during cold starts and hot running tests. If touch is required, confirm the controller, host driver and cover stack for the exact configuration and test edge taps on the sample.

Use the full display part number and revision from the unit label and the corresponding drawing. Include the drawing revision, flex or connector version and any touch or cover option in the quote. Give us the sample quantity, production quantity and required date so we can confirm the configuration and lead time.