1.1 inch AMOLED Display 126x294 with Hight Brightness

Use the 1.1-inch diagonal to shortlist display modules, then check the exact drawing for fit. Overlay the visible area, module outline and flex exit on your enclosure drawing. Get the native pixel layout first, then try your menus and text at that layout before committing to the enclosure.

For the listed SPI interface, check the exact controller, SPI mode, logic levels and update time with a representative screen. Before connecting it, check the power rails and reset sequence in the module documentation.

Compare the candidates with the same content, cover and lighting, then select against your minimum contrast and viewing-angle requirements. Use the listed 500 cd/m² to shortlist the display, then judge the assembled product with its final cover and ambient lighting. Compare the cost and space of any changes to the cable, host board or front cover.

Start with repeated power cycles, then test the intended UI through the finished cover. Use the listed −20 °C to +70 °C operating range to plan cold starts and hot running tests, with temperature measured at the panel. The listed configuration has no touch. If your design needs it, confirm the overlay, controller and cable as separate items in the quote.

Use the full display part number and revision from the unit label and the corresponding drawing. Include the drawing revision, flex or connector version and any touch or cover option in the quote. Give us the sample quantity, production quantity and required date so we can confirm the configuration and lead time.