1.8″ TFT LCD SPI – 16-bit RGB 65K Color, 128×160, ST7735 with SD Slot

SKU: DS20207

Size:	1.8 inch
Resolution:	128*160
Interface:	SPI
Touchscreen Support:	NO
Board Support	Raspberry Pi

1.8 inch TFT LCD SPI with 16-bit RGB 65K colors, 128×160 resolution. Integrated SD card slot, low-power SPI interface, minimal I/O required. Operates in -20℃~60℃. Ideal for embedded systems & DIY projects.

$99.00

Description

1.8″ TFT LCD SPI – 16-bit RGB 65K Color, 128×160:

1.8 inch SPI LCD Module – a high-performance display solution designed for seamless integration and versatile applications.

✅ SPI Serial Interface: Requires only 4-6 I/O pins, reducing wiring complexity and saving MCU resources.
✅ SD Card Slot: Expand storage capacity for fonts, images, and data logging, enabling rapid prototyping.
✅ Wide Temperature Range: Stable operation from -20℃ to 60℃, suitable for industrial and outdoor environments.
✅ Low Power Design: Optimized for battery-powered devices like portable instruments and IoT gadgets.

1.8inch SPI Module ST7735S
Key Parameters	Display Color	RGB 65K color	Interface	PIN NO.	SYMBOL	DESCRIPTION
	Screen Size	1.8(inch)		1	VCC	5V/3.3V power input
	Type	TFT		2	GND	Ground
	Driver IC	ST7735S		3	CS	LCD chip select signal, low level enable
	Resolution	128*160 (Pixel)		4	RESET	LCD reset signal, low level reset
	Module Interface	4-wire SPI interface		5	A0	LCD register / data selection signal,
	Active Area (AA area)	28.03×35.04(mm)		5	A0	high level: register, low level: data
	Module PCB Size	34.5×58.0(mm)		6	SDA	SPI bus write data signal
	Operating Temperature	-20℃~60℃		7	SCK	SPI bus clock signal
	Storage Temperature	-30℃~70℃		8	LED	Backlight control, high level lighting,
	VCC power voltage	3.3V		8	LED	if not controlled, connect 3.3V always bright
product picture